When Abel Motorsports set out to strengthen our INDY NXT program for 2026, we looked hard at every tool that could make our driver lineup faster and our engineers sharper. We tested the options. We asked tough questions. And we chose a SimCraft APEX 6 GT, the full motion racing simulator that now sits at the center of our racing program.
Here is the reasoning behind that decision, and why it beat the high-end OEM systems we evaluated.
The factory-level driver-in-the-loop simulators get most of the attention in pro motorsport. They also carry multimillion-dollar price tags, long lead times, and proprietary software that locks you into one ecosystem.
The APEX 6 GT gave us the same six-axis motion fidelity at a fraction of the cost, and that fraction is the part worth considering. For the price of a single seven-figure OEM system, we could put an APEX 6 GT in front of eight to ten of your people. That’s a unit for each of your drivers, engineers, and crew chiefs, instead of one shared seat the whole team has to queue for. SimCraft offers a full lineup of racing simulators, and the configuration we chose put professional motion fidelity in reach across our entire program.
The track-time math sealed the deal. For a team operating in INDY NXT, where a single season runs roughly $1.8 million and an hour of real track time costs over $54,000, an APEX 6 GT ELITE pays for itself in about three hours of equivalent seat time. That kind of return made the decision straightforward. We did not have to choose between motion accuracy and financial sense.
Here is the technical part that mattered most to our engineers.
Most high-end motion platforms are built on hexapod technology. Six actuators push against a single platform, so the degrees of freedom blend together and fight each other. The result teaches the body movement that a real car never makes. For a racer chasing hundredths of a second, that is worse than no motion at all, because it trains the wrong instincts. Clean racing motion is the whole point, and a hexapod cannot deliver it.
SimCraft works differently. The APEX 6 GT is a center of mass system that moves each of its 6DOF independently and relatively. Roll, pitch, yaw, surge, sway, and heave each respond on their own, the way a real chassis loads and unloads. It physically moves the seat around the driver’s true center of mass, so the cues match the car.
Just as important, the screens and the seat move together as one cockpit. On a hexapod with stationary monitors, your eyes stay fixed while the platform shoves you around, and the conflict between what you see and what you feel produces false cues and fatigue. In a SimCraft, the whole cockpit travels as a unit. It is the most accurate motion feel we have driven, and it is what our drivers rely on when they are learning a new circuit.
A racing simulator is only useful if it fits your existing workflow. Plenty of OEM movers force you onto their software and their data formats.
The SimCraft motion system runs with whatever we already use. iRacing, Assetto Corsa, and our own custom engineering software all drive the same system. Our chief mechanic and race engineers did not have to relearn their tools or rebuild their setup library. They plug in, push a button, and they are on track.
That flexibility is why this setup slotted into our program without friction. The motion platform adapts to us, not the other way around.
Track time is the most expensive resource in racing. Tires, fuel, transport, crew hours, and the very real risk to a six-figure car all stack up every weekend. Every lap a driver banks in the simulator is a lap we do not pay for at the circuit. Every dollar we keep off the racing budget goes back into the car.
For an INDY NXT effort, the APEX 6 GT turns unlimited, repeatable track time into a fixed cost. Our driver can run a corner two hundred times before a race weekend. Our engineers can test a setup change before it ever touches the real car. The science of driver development with motion simulators backs this up: correct motion cues build correct muscle memory, and that translates directly to the track.
We put our APEX 6 GT to work across four jobs every week.
Driver development: building confidence and car control in a true center of mass environment. Track preparation: learning every circuit on the calendar before we arrive. Engineering: validating setup direction with repeatable, physics-correct™ data. Recovery: keeping our talent sharp and rehearsing race scenarios between events.
This is the same APEX 6 GT approved as a NASCAR simulator for Cup Series teams under the driver-in-the-loop rules, the same standard demanded across NASCAR and IMSA competition. That approval was part of why we trusted the platform before we ever signed off on it.
SimCraft handled delivery and white-glove installation at our shop, so the system was dialed in and ready before our team ever sat in it. From our pro drivers to our engineers, everyone in the program now trains in the same environment, on the same data, week in and week out.
Choosing the APEX 6 GT was a technical decision first and a financial one second. We got
professional-grade motion fidelity, software freedom, and economics that make sense for a growing team. That combination is why we go racing with SimCraft.
A hexapod blends all six degrees of freedom through six shared actuators, which can teach the body movement a real car never makes. The APEX 6 GT moves each degree of freedom independently around the driver’s center of mass, so the motion cues match real chassis behavior.
Yes. The SimCraft system is compatible with iRacing, Assetto Corsa, and custom engineering software, so teams keep their current tools and data without being locked into a proprietary ecosystem.
Real track time is extremely expensive once you add tires, fuel, transport, and risk to the car. A simulator turns repeatable track time into a fixed cost, and a high-level system can pay for itself in only a few hours of equivalent on-track running.
When monitors stay fixed and only the platform moves, what a driver sees and feels conflict, creating false cues and fatigue. In a SimCraft, the screens and seat travel as one cockpit for the most accurate feel.